Search

My Account

YXZ1000R HD Tie Rod Kit - WR Edition

YXZ1000R HD Tie Rod Kit - WR Edition

26 Review(s) Write a Review

Your Price: $323.22

Questions about this item? Ask here.

Part Number: 10120

Suspension Type *

Quantity

Description
Customer Reviews
Questions and Answers

YXZ1000R HD Tie Rod Kit - WR Edition

Direct OEM replacement
Replaces the entire tie rod assembly including the weak inner shaft / ball
Hex design for easy adjustment
Low profile outer heim to clear every wheel we could find
Inner clevis made specifically for this vehicle with the angle locks to keep from loosening
Inner clevis with low profile pin / clip to clear original boot
All components are coated to keep from rusting
Easy to install! Uses your stock boots.

We have been testing these on our race cars and they are flawless. They truly are the best on the market.

Click here for Installation Instructions.

Q: is it at all possible that i could just purchase the clevis end of these tie rods. i would like to just purchase the the clevis and the bolt that holds the clevis on and the pin that holds the heim into the clevis if there is any way possible? thanks please let me know.

Asked by: ryan - 1/12/2019

A: We do have replacement parts available under our WR Edition Replacement Parts category.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (4/10/2019)

Submit an answer

Q: i need a parts for this item

Asked by: Miguel - 4/10/2019

A: You are able to purchase replacement parts under our WR Edition Replacement Parts category.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (4/10/2019)

Submit an answer

Q: I just ordered a long travel kit for my YXZ1000R and it adds 3.5" of width to each side. I'm looking at your tie rods and you have several to choose from. But you have the ones that are 3.5" inches longer listed for a LSR kit in the label and the fireball kit listed as 4" longer. I am assuming if my kit adds 3.5" wider I need the 3.5" kit listed for the LSR kit? Is that correct?? T thank you so much for your help!!

Asked by: Richard Lee Maynard - 4/10/2019

A: For kits adding 3.5" you will want to use the +3.5 kits.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (9/6/2019)

Submit an answer

Q: Noticed B/O status.... are these for sure back in stock this week? Needing replacements quick.... Thanks in advance for a quick reply!

Asked by: Scott Dana - 5/28/2019

A: In stock and ready to ship

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (9/6/2019)

Submit an answer

Q: One other question: In order to set toe in, does the inner boot have to be slid back in order to loosen/tighten the sleeve lock nut? Looks a little labor intensive? Please clarify.

Asked by: Scott Dana - 5/28/2019

A: For toe settings only the inner/outer jam nuts will need to be broken loose to allow for adjustment of the hex.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (9/16/2019)

Submit an answer

Q: on the tie rod kit for yamaha yxz1000, do you have them in stock and how does the outter ball joint do in mud/dirt for trail riding

Asked by: kurt - 9/6/2019

A: Kits are in stock and ready to ship. The outer joints that we use in the kits are a self lubricating joint which holds up great in all environments.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (9/6/2019)

Submit an answer

Q: Can I get these with a 14mm x 1.5 thread on the rack end to fit a wicked built rack?

Asked by: Tim Christensen - 9/15/2019

A: The kits will come with the 1.25 thread to match the stock rack or our HD rack. If you are looking for another thread please call or contact us direct and we will do our best to see if we can find you a solution for this.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: kyle anderson (9/16/2019)

Submit an answer

Questions about this item? Ask here.

YXZ1000R Rear Sway Bar Clamp Kit - WR Edition

(38)

YXZ1000R Rear Sway Bar Clamp Kit - WR Edition

$43.18

Eibach Crossover Spanner Wrench Pr.

(3)

Eibach Crossover Spanner Wrench Pr.

$21.54

WR Shock Covers (pr)

(1)

WR Shock Covers (pr)

$79.20

YXZ1000R RC2 Dual Rate Spring and Shock Valving Package - WR Edition

(0)

YXZ1000R RC2 Dual Rate Spring and Shock Valving Package - WR Edition

$1,500.00