My Account  |  0 item(s)    View Cart
Ph: 480.507.4771


Your Price: $2,299.00
Part Number:X21MXSGPS130

Choose Options


is the new AiM dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels.
Performance and data acquired can also be incremented adding up to eight expansion modules.
Its 5" display has been specifically designed for small cockpits installation.
AiM MXS StradaMXS is also available in its
version, a dash for road use.
and gyro
GPS08 Module

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

A high contrast TFT display identifies MXS at the first glance.
An ambient light sensor keeps the backlight at optimum brightness levels.

You can define all the custom pages you wish, choosing among a wide
library of page styles, defining which data to be shown, their end of scale
and measure units.
Swapping between pages can be managed pushing one or two pushbuttons.

MXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Six configurable RGB alarm LEDs

MXS features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.
They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Digital outputs
More info

Choose from a host of advanced multicoloured RGB shift light patterns
that can be customized to your liking, and for each unique gear when

Using the built-in CAN bus, you can add expansion modules to the MXS to increment the performance and the data acquired:
GPS08 ModuleGPS08 Module
Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.
Channel ExpansionChannel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
TC HubTC Hub
It adds 4 K thermocouples.
LCU-One Lambda ControllerLCU-One Lambda ControllerWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
SmartyCam HD camerasSmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
Memory ModuleMemory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.

Race Studio 3 is the heart of your MXS, managing all your activities related to:

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.
Race Studio 3
With Race Studio 3 you can also analyse all data recorded by MXSand downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.
Race Studio 3
Download Race Studio 3
AiM LearnFast E-training Series
Check out how to use Race Studio 3 Configuration:
Part 1 - Part 2
AiM LearnFast - E-training Series by Roger Caddell

Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.

Related Items


Recently Viewed Items