Weller Racing

- Home

- THE TEAM

- News

- Photos

- CORR Rhino #1

- CORR Rhino #2

- Videos

- Links

- Contact us

- Engine Shop

CHECK OUT OUR 3 RHINO ENGINE KITS!

If you wanted Reliability and Customer Service....... You came to the right place!

720cc STROKER KIT installed $4200.00 + tax

Not Installed $3900.00 + tax

45+ Horsepower!

#1 Selling kit!

*CUSTOM PISTON - OK ON PUMP GAS!!!

*BORE CYLINDER

*WELLER RACING SPECIAL CAM

*STROKE/BALANCE/WELD CRANK WITH CUSTOM ROD

*ALL GASKETS

*VALVE SEALS

*WELLER RACING VALVE SPRINGS WITH TITANIUM RETAINERS

*CUSTOM CNC PORTING AND POLISHING AND SPECIAL HEAD MODS

*ALL LABOR TO REMOVE ENGINE, REBUILD AND INSTALL

*JETTING/TUNING OF NEW ENGINE

*OIL, FILTER, ENGINE ICE COOLANT

*WELLER RACING 9MM HEAD STUD KIT

*CUSTOM OIL MODIFICATIONS IN ENGINE BOTTOM END

*BILLET DIFF PLATE

- RECOMMENDATIONS: (PARTS ONLY. EXTRA FOR INSTALL)

*MIKUNI HSR45MM CARB W/ CABLE $390.00

*K&N INTAKE KIT $369.00

*DMC DUAL EXHAUST KIT $850.00

*PWR RADIATOR KIT WITH FAN $569.00

*DRY CLUTCH SYSTEM $1250.00

*WELLER RACING TEMP./VOLT GAUGE KIT $200.00

*WELLER RACING HIGH VOLUME FUEL FILTER $5.00

*HIGH VOLUME FUEL PUMP KIT $55.00

*CDI IGNITION $209.00

This kit is perfect for the ones that want speed, performance, reliability, weather you are a duner or a trail rider. With 20+ of these kits out there our name speaks for itself. Average 50-55hp to the rear wheels... Average speed with Intake, Carb, Exhaust, Clutch, and this kit is 65+ MPH

- 760cc STROKER KIT installed $4300.00 +tax

Not Installed $4000.00 + tax

50+ Horsepower!

*CP PISTON 10.5:1 or 14:1 COMPRESSION

*BORE CYLINDER

*WELLER RACING SPECIAL CAM

*STROKE/BALANCE/WELD CRANK WITH CUSTOM ROD

*ALL GASKETS

*VALVE SEALS

*WELLER RACING VALVE SPRINGS WITH TITANIUM RETAINERS

*CUSTOM CNC PORTING AND POLISHING AND SPECIAL HEAD MODS

*ALL LABOR TO REMOVE ENGINE, REBUILD AND INSTALL

*JETTING/TUNING OF NEW ENGINE

*OIL, FILTER, ENGINE ICE COOLANT

*WELLER RACING 9MM HEAD STUD KIT

*CUSTOM OIL MODIFICATIONS IN ENGINE BOTTOM END

*BILLET DIFF PLATE

- RECOMMENDATIONS: (PARTS ONLY. EXTRA FOR INSTALL)

*MIKUNI HSR45MM CARB W/ CABLE $390.00

*K&N INTAKE KIT $369.00

*DMC DUAL EXHAUST KIT $850.00

*PWR RADIATOR KIT WITH FAN $569.00

*DRY CLUTCH SYSTEM $1250.00

*WELLER RACING TEMP./VOLT GAUGE KIT $200.00

*WELLER RACING HIGH VOLUME FUEL FILTER $5.00

*HIGH VOLUME FUEL PUMP KIT $55.00

*CDI IGNITION $209.00

This kit is for the racers only!!! Your choice of pump gas or race gas.

800cc STROKER KIT installed $4800.00 + tax

Not Installed $4500.00 + tax

55+ Horsepower!

*CUSTOM RACE PISTON 14:1 COMPRESSION

*INSTALL SLEEVE / BORE CYLINDER

*BORE ENGINE CASES FOR LARGER CYLINDER

*CUSTOM SLEEVE/CYLINDER

*WELLER RACING SPECIAL CAM

*STROKE/BALANCE/WELD CRANK WITH CUSTOM ROD

*ALL GASKETS

*VALVE SEALS

*WELLER RACING VALVE SPRINGS WITH TITANIUM RETAINERS

*CUSTOM CNC PORTING AND POLISHING AND SPECIAL HEAD MODS

*ALL LABOR TO REMOVE ENGINE, REBUILD AND INSTALL

*JETTING/TUNING OF NEW ENGINE

*OIL, FILTER, ENGINE ICE COOLANT

*WELLER RACING 9MM HEAD STUD KIT

*BILLET TIMING CHAIN TENSIONER

*CUSTOM OIL MODIFICATIONS IN ENGINE BOTTOM END

*BILLET DIFF PLATE

- RECOMMENDATIONS: (PARTS ONLY. EXTRA FOR INSTALL)

*MIKUNI HSR48MM CARB W/ CABLE $390.00

*K&N INTAKE KIT $369.00

*DMC DUAL EXHAUST KIT $850.00

*PWR RADIATOR KIT WITH FAN $569.00

*DRY CLUTCH SYSTEM $1250.00

*WELLER RACING TEMP./VOLT GAUGE KIT $200.00

*WELLER RACING HIGH VOLUME FUEL FILTER $5.00

*HIGH VOLUME FUEL PUMP KIT $55.00

*CDI IGNITION $209.00

This kit is for the racers only!!!

***MUST USE RACE FUEL 110 OCTANE OR HIGHER***

Other Engine Mods:

-CRANKSHAFT SERVICES

*STROKE / BALANCE / WELD / WITH NEW ROD / PIN / BEARING $950.00

*BALANCE ONLY $200.00

*REBUILD ONLY $95.00 +$35.00 PARTS (BEARING / PIN / ROD BEARING

-BOTTOM END MODS

*WHILE ENGINE IS DISS-ASSEMBLED $50.00 (OIL MODIFICATIONS / DIFF MODIFICATIONS)

-CYLINDER SERVICE

BORE HONE / 2mm $85.00

SLEEVE / BORE / HONE $150.00

-PORTING AND POLISHING

CNC PORTING WITH VALVE JOB $550.00 (HEAD AND INTAKE) add $45.00EA (X 5) FOR +1mm VALVES

BIGGER VALVE INSTALL W/O PORTING AND POLISHING $100.00 +1MM

Engine parts:

CYLINDER HEAD STUD KIT (45 FT/LBS) $125.00

DRY CLUTCH KIT $1250.00

BILLET TIMING CHAIN TENSIONER $75.00

COMETIC TOP END GASKET KIT $75.00

JE PISTONS $166.50 (100mm / 102mm / 105mm - 10.75:1 / 12:1)

CP PISTONS $230.00 (100mm / 102mm / 105mm - 11:1 / 12:1)

ENGINE ICE $19.95

WATER PUMP SEAL KIT $45.00 (BEARING, WATER SEAL, OIL SEAL, GASKET)

SECONDARY OUTPUT SHAFT SEAL KIT $25.00 (O-RING AND SEAL)

MIKUNI CARB HSR45 $350.00 - CABLE KIT $40.00

KEIHIN CARB FCR41mm W/ CABLE $550.00

*** WELLER RACING ENGINE INSTALLATION CHECKLIST ***